Assemble Lucky Bamboos in a Test Tube can be difficult at first. We are here to show you some tips that we learn from our experience. Lucky Bamboo with Test Tube are great favors for events and trade shows. It is inexpensive and easy to customize.
Materials needed to assemble lucky bamboos in test tubes
We recommend doing this assembly over a sink or a location where you don’t mind water splashing all over the place. You will need the following to make your Lucky Bamboo Arrangements:
Step 1: Fill the container with water and insert cap.
Fill the container half way with water and insert cap. Use a knife and carefully cut one slit from the center of the cap to the edge. This will make it easier to insert the lucky bamboo. If the bamboo is thick or have a lot of roots, cut two slits.
Step 2: Insert bamboo through the cap.
Insert the lucky bamboo through the cap. When inserting the bamboo, some of the roots may break. Don’t worry, the bamboo will be okay. It roots will eventually grow back.
Step 3: Push bamboo into test tube.
Carefully push the top of the stem into the test tube to the desire level. You may push it all the way down or halfway. Whichever method you choose, ensure that the roots are submerge in the water. Water may squirt out from the cap when inserting bamboo. So make sure you do this over a sink or outside in the shade.
Tips and instructions:
- Do not allow the bamboo roots to dry out.
- Make sure you keep the bamboo out of direct sunlight.
- When the container is low in water, remove the rubber cap with the bamboo together (You do not have to pull out the bamboo from the rubber cap). Fill the container half way with water and insert the cap with bamboo.